Bow Spider Bow Packing System

The Bow Spider universal bow packing system fits any bow and affixes to any pack, hip, tree, wall, or car for easy storage and access.

The Complete Kit comes with a Receiver, 2 Standard Load Lifter Straps (12 inches long), 1 Waist/Tree Belt, 4 Corner Screws, 1 Anodized Aluminum Post, 1 Long Mounting Screw, and 4 Long Corner Screws. This system is great for any bowhunter or competitive archer. You can easily stow your bow while you hike, stalk, stand, or drive down the road. 

NOTE: GREEN COLOR MAY VARY

(total package weight - 0.8 pounds)

This product requires the purchase of a "Complete Bow Spider Packing System" or "extra post"

It is also recommended that you purchase extra straps so you can mount these extra receivers to other packs

If you need extra receivers for your truck, tree stand, wall, garage, side by side or saddle pick up an extra one or two. Extra receivers are great to have when storing your bow or hanging it at your range at home.

GREEN COLOR MAY VARY SLIGHTLY

Receiver weight- 3 ounces

If you need extra receivers for your truck, tree stand or garage, pick up an extra one or two here now. Extra receivers are great to have when storing your bow, or hanging it at your range at home. Having two extra will give you more options.

GREEN COLOR MAY VARY SLIGHTLY

This product requires the purchase of a "Complete Bow Spider Packing System" or "Extra Post"

It is also recommended that you purchase extra straps so you can mount these extra receivers to other packs

Get an additional set of straps for your Bow Spider packing system. We have the standard size (12 inches) that are included with the Bow Spider system and we also have longer straps (18 inches) available for mounting on larger volume packs. These come in handy if you need a quick extra strap for your bow or if you want to put multiple Bow Spider receivers on multiple packs.

You get 2 straps with each order. 

This product requires the purchase of a "Complete Bow Spider Packing System" or "Extra Post"

The Attack Pack harness system comes as pictured with the harness and a receiver attached. Now you can put the stalk on an animal without having to worry about dragging your day pack with you. This efficient pack design allows you to utilize the Bow Spider Packing system on your back in a small and stealthy way. This will make your approach much more efficient with your bow. This is also great for wearing your Bow Spider on the range and at 3D shoots.

Standard Chest Circumference is approximately 58 inches.

XL Chest Circumference is approximately 70 inches.

Proudly Made in the USA! Support Local!

You must have a Bow Spider Receiver for this product to work. 

Now you have the option to get your extra post with the angle bracket attached or separate. Have more than one bow? Get an extra post for your 2nd bow or your family member's bow(s). This additional post will give you the flexibility to use the Bow Spider system on multiple bows at the same time.

Option 1 BRACKET SEPARATED: If you plan to through-bolt your post to your bow in a location other than behind your front stabilizer, it's suggested you order a post with the bracket separate.

Option 2 BRACKET ATTACHED: If you plan to run your extra post behind your stabilizer (most common location) then you should order it with the bracket attached. 

The post comes with 1 "L" bracket, 1 long mounting screw, 1 short mounting screw, and 1 rubber scratch guard. 

Post weight- 2 ounces

Keep your gear dry with this ultra light-weight waterproof pack cover. Elastic stretch fit slips easily over your pack in seconds. 

Large fits packs approximately  2000-3000 cu inches

XL fits packs approximately 3000-4000 cu inches.

Total weight 66 grams. 

Give the gift of hands free bow packing. 

Upgrade your arrows with these custom Bow Spider design arrow wrap, high quality, made in USA product. 1x6 inches in size.

One dozen in each pack. 

State Wraps are made from premium 2 mil cast vinyl - conventional wraps use 4 mil “bumper sticker” material that weighs twice as much. Weight matters - especially on the back end. What is a “Mil”? It is a measure of thickness equal to 1/1000th of an inch. State Wraps are half the thickness and weight of conventional wraps. For detailed product description visit https://www.statewraps.com/

.The Bow Spider universal bow packing system fits any bow and affixes to any pack, hip, tree, wall, or car for easy storage and access.

The Complete Kit comes with a Receiver, 2 Standard Load Lifter Straps (12 inches long), 1 Waist/Tree Belt, 4 Corner Screws, 1 Anodized Aluminum Post, 1 Long Mounting Screw, and 4 Long Corner Screws. This system is great for any bowhunter or competitive archer. You can easily stow your bow while you hike, stalk, stand, or drive down the road. 

(total package weight - 0.8 pounds)

A portion of your purchase on all RMEF Edition products goes directly back to RMEF for hunting conservation. RMEF Edition includes everything the standard complete kit contains. The receiver is Black and the post includes an RMEF/Bow Spider logo. 

You must have a Bow Spider Receiver for this product to work. 

Now you have the option to get your extra post with the angle bracket attached or separate. Have more than one bow? Get an extra post for your 2nd bow or your family member's bow(s). This additional post will give you the flexibility to use the Bow Spider system on multiple bows at the same time.

Option 1 BRACKET SEPARATED: If you plan to through-bolt your post to your bow in a location other than behind your front stabilizer, it's suggested you order a post with the bracket separate.

Option 2 BRACKET ATTACHED: If you plan to run your extra post behind your stabilizer (most common location) then you should order it with the bracket attached. 

The post comes with 1 "L" bracket, 1 long mounting screw, 1 short mounting screw, and 1 rubber scratch guard. 

Post weight- 2 ounces

A portion of your purchase on all RMEF Edition products goes directly back to RMEF for hunting conservation.